It can be conveniently installed under a sink or bench or anywhere that suits. Suitable for domestic or light to medium commercial applications.
Cabinet: The IC8 is constructed of "Galvalume," a material with the ideal blend of Aluminium Zinc and silicone which provides the IC8 with superior heat and corrosion resistance.
Chilling & Storage Tank: Constructed of stainless steel, it has a volume of 1.9 Litres, is fully insulated and independantly tested to withstand over 800psi static pressure.
Refrigeration System: This fan assisted, static condensor system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts.
The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed.
Plumbing Connections: Both inlet and outlet are recessed, 1/4" stainless steel pipes, suitable for connection to industry standard 1/4" quick connect fittings and tubing.
Electrical Connections: The IC8 is furnished with 1.8 metre GPO power cable and plug. 240volts, 50Hz. single Phase. Running amps 0.74A. Power Consumption 120W
Weight and Dimensions: 12.5kg 210mm (W) x 410mm (D) x 290mm (H)
Warranty: The IC8 water cooler is covered by a 2 year comprehensive warranty.
HydROtwist Premium Quick Change Twin Under Sink Water Filter System
Ultra Compact Design
Uses Minimal Space Under the Sink
Hygienic Twist-off Cartridges
2 Stage Filtration
Stage 1 - HydRotwist 5 Micron Granular Carbon Filter
Pre-filter - Granular Activated Carbon
Removes Dirt, Rust, Sediment, Taste and Odour
Stage 2 - HydROtwist 1 Micron Carbon Block
Carbon Block - 1 Micron Absolute Filtration
Removes Crypto, Giardia, Metals & Chemicals
This system comes with an IC8 Under Sink Chiller, HydROtwist Premium Twin Under Sink (with Pressure limiting valve and plumbing kit) and choice of single lever designer tap to provide just chilled filtered water or a dual lever designer tap to provide chilled and ambient filter water. Please choose above
Installation: Read Below*
*Installation is available in the Sydney metro region ONLY . If you are located out of the Sydney metro region or interstate we can supply details of a local plumber/installer after purchasing your filter system. Price above is for a standard installation within the Sydney Metro Area with water supply within 1.5m of installation point and tap/faucet installed on a laminate/wooden bench top or in a stainless steel sink. Non standard installations will incur an extra fee.
(Please Note: NON Standard Installations will incur an extra fee of $65.00 + any parts/fittings required - Granite, marble and/or stone benchtops will incur an additional fee of $45.00)
**Filter replacement service/maintenance is available in the Sydney metro region ONLY.