Zip Autoboil 25.0 Litre Over Sink Wall Mount Thermostatically Controlled Instant Boiling Water
- Great Value Functional instant boiling water heater.
- Patented twin chamber technology seperating the incoming cold water supply from the boiling chamber.
- Patented steam-heat boost feature pre-heats mains water in the cistern prior to entry into th boiling tank.
- Designed to maintain water within 1 degree of set point. Factory set to 98 degrees.
- Inbuilt temperature controls that will automatically cut off the power in the event of temperature control failure, boil dry cut-out or a blocked vent pipe.
- Copper main tank with stainless steel cistern.
- Provision for service access to the boling chamber.
- Optional 1 or 5 Micron Premium HydRotwist Filter
- Long-life incoloy sheathed embedded rod type.
- Capillary Type
- White Only
- Tortine insulation
- Thermal cut-out integral to heating element; thermal cut-out on vent tube
- Autoboil 25.0 Litre (AB025) 150 cups at a time. Recovery rate: 180 cups per hour
- Dimensions: 600mm (H) x 390mm (W) x 299mm (D)
*Installation is available in the Sydney metro region ONLY . If you are located out of the Sydney metro region or interstate we can supply details of a local plumber/installer after purchasing your filter system. Price above is for a standard installation within the Sydney Metro Area with water supply within 1.5m of installation point and tap/faucet installed on a laminate/wooden bench top or in a stainless steel sink. Non standard installations will incur an extra fee.
(Please Note: NON Standard Installations will incur an extra fee of $65.00 + any parts/fittings required - Granite, marble and/or stone benchtops will incur an additional fee of $45.00)
**Filter replacement service/maintenance is available in the Sydney metro region ONLY.