Menu
Your Cart
Free Local Delivery On Orders Over $30.00 & Flat Rate Worldwide Shipping Only $15.00!

Whole House Point of Entry (POE) Twin Vessel Carbon Water Filter

Whole House Point of Entry (POE) Twin Vessel Carbon Water Filter
Whole House Point of Entry (POE) Twin Vessel Carbon Water Filter
  • Availability: Low Stock*
  • Brand: HydROtwist
  • Model: HTG2000
  • Weight: 90.00kg
Products Sold: 0
Product Views: 2764
$2,699.00
Ex Tax: $2,453.64

Twin Vessel Whole of House Point of Entry Carbon Water Filter System - Manual Back Flush

Installed on mains plumbing, sediment, chlorine, tastes, odours, colour and volatile organic compounds are removed from all taps and showers throughout the house, at up to 90 litres per minute, protecting tap washers, hot water systems and appliances. Comes complete with 2 x premium high flow pressure vessels, 2 x UV suncover protector, 2 x manual valve head assembly, and GAC Granular Activated Carbon.

Complete and ready to install with 1" BSP Inlet, Outlet and Backwash ports.

Available in Manual Back Flush and Rinse.

The backwash valve extends the life of the granular activated carbon media by enabling it to be back-washed and cleaned. All sediment and sludge is flushed to waste, either into the garden or storm water drain. This is accomplished simply by turning a knob, allowing the mechanical operation to back-wash and or rinse. Using this method the carbon media will last the average household three to four years, depending on water quality and usage.

Comes complete and ready to install.

Vessel dimensions: 10" (25.5cm) Diameter x 56" (142.5cm) High

*Installation is available in the Sydney metro region ONLY . If you are located out of the Sydney metro region or interstate we can supply details of a local plumber/installer after purchasing your filter system. Price above is for a standard installation within the Sydney Metro Area with water supply within 1.5m of installation point and tap/faucet installed on a laminate/wooden bench top or in a stainless steel sink. Non standard installations will incur an extra fee.

(Please Note: NON Standard Installations will incur an extra fee of $65.00 + any parts/fittings required - Granite, marble and/or stone benchtops will incur an additional fee of $45.00)

**Filter replacement service/maintenance is available in the Sydney metro region ONLY.

**This is only to be used as a guide. Water filters should be installed by a professional.

 

 

Write a review

Please login or register to review
Cookies
We use cookies to personalise your experience. By continuing to use our site or closing this notification you are agreeing to our Cookies Policy.