Instapure R2, R2CB, R-2C, R-2CE are all part numbers for these that suit the Waterpik tap filter Models F-2, F2CE, F-3 & F-6, F-6E, F7.
The Instapure R2 is the replacement water filter cartridge for the F2 Essentials Faucet Filtration System. The R2 provides cleaner, better tasting drinking water right from your kitchen sink.
The Essentials R2 Faucet Filter Replacement Cartridge fits the Instapure F2 Faucet Water Filter System as well as the F3, F5 and F7.
- Reduces chlorine taste and odor for better drinking water
- Cost effective alternative to bottled water
1. Unscrew the filter cover and set aside
2. Grasp the used filter on one hand and the filter unit in the other hand
3. Lift the used filter straight up and discard
4. Remove the red plug (if present) from the bottom of the new filter
5. Align the holes in the new filter with the white discs in the filter unit
6. Press the filter straight down
7. Screw the cover back into place
8. Flush the new filter for 2 minutes (and for a few seconds before each use)
Reduces the Following:
- 92% of Chlorine
- Bad Taste & Odor
- Filter Life: 3 months to 200 gallons
- Flow Rate: 0.75 gallons per minute
- Operating Pressure: 20 - 100 psi
- Operating Temperature: 40 - 100 F
- Actual Size: 3″ x 2″
- UPC: 891465002131