Menu
Your Cart
Free Local Delivery On Orders Over $30.00 & Flat Rate Worldwide Shipping Only $15.00!

Aquatec Pump PSW Pressure Switch 1/4" or 3/8" Fittings

Aquatec Pump PSW Pressure Switch 1/4" or 3/8" Fittings
Aquatec Pump PSW Pressure Switch 1/4" or 3/8" Fittings
  • Availability: Low Stock*
  • Brand: Aquatec
  • Model: AQUA-PSW
  • Weight: 0.20kg
Products Sold: 1
Product Views: 4013
$49.00
Ex Tax: $44.55

Aquatec PSW 240 & PSW 340 Pressure Switch.

- 100% factory tested
- Built-in John Guest connectors

Aquatec's PSW tank pressure sensing electrical switches are intended for in-line mounting as close to the hydropneumatic product water tank as possible.

Its purpose is to turn off the Booster Pump when the tank is full. Normally closed switch set for 40 PSI.

The PSW, when used with a typical under-counter RO system, enables the hydraulic shut-off valve to open and close very reliably and positively.

The PSI trigger point can be adjusted using a 050 Allen Wrench inserted into the small chrome nut in one of the two adjacent circular surfaces on the switch.

Simply turn to adjust the actual water PSI shut off point for your system. Counter clockwise will decrease the off pressure of the pump and clockwise will increase the off pressure. To make the pump turn off at a lower pressure setting turn the screw counter clockwise. Set the switch once the system has filled and shut off.

Write a review

Please login or register to review
Cookies
We use cookies to personalise your experience. By continuing to use our site or closing this notification you are agreeing to our Cookies Policy.