The RP2 Aquacooler Freestanding Water Cooler Titanium has been the choice for many homes and offices for years.

Made in Australia

Freestanding, Point of Use. Plumbed in mains Pressure Water Cooler

No Drain Outlet Required

Unique float valve assembly

Contemporary design to suit any workplace

World class reliability and performance

COLD WATER RESERVOIR

All dispensers have stainless steel tanks that hold approximately 1.8 Litres of chilled water during normal usage. Each has a chilling capacity of 5 Litres per hour during busy periods.

REFRIGERATION

The system uses 40 grams of R134a refrigerant, which is non-toxic, non-flammable and is environmentally friendly. A capillary tube, which has no moving parts, controls refrigerant flow.

TEMPERATURE CONTROL

A factory pre-set thermostat controls the temperature of water in the cold tank. The water temperature in the hot tank is controlled by a mechanical thermostat set to approximately 85 degrees celsius.

COMPRESSOR

1/16 hp capacity 49 watts. The compressor is hermetically sealed for silent running.

CONDENSOR

All steel tube and wire construction.

ELECTRICAL

240 volts, 50Hz. 2 metre house cable and 3 pin plug are supplied.